MP-1-R-10.000MHZ

MtronPTI MP-1-R-10.000MHZ

Part No:

MP-1-R-10.000MHZ

Manufacturer:

MtronPTI

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

35460018-MP-1-R-10.000MHZ

Category:

Crystals

Description:

Crystal 10MHz ±30ppm (Tol) ±50ppm (Stability) 18pF FUND 40Ohm 2-Pin HC-49/U Thru-Hole

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Product Depth (mm)
    4.65(mm)
  • Operating Temp Range
    -10C to 70C
  • Mounting Styles
    Through Hole
  • Mode of Oscillation
    Fundamental
  • Usage Level
    Commercial grade
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -20°C ~ 70°C
  • Series
    SiT8208
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tape & Reel (TR)
  • Size / Dimension
    0.197 L x 0.126 W (5.00mm x 3.20mm)
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Type
    XO (Standard)
  • Voltage - Supply
    2.5V
  • Frequency
    3.57MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±10ppm
  • Output
    LVCMOS, LVTTL
  • Function
    Enable/Disable
  • Base Resonator
    MEMS
  • Current - Supply (Max)
    33mA
  • Current - Supply (Disable) (Max)
    31mA
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    18(pF)
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±30
  • ESR
    40(ohm)
  • Screening Level
    Commercial
  • Absolute Pull Range (APR)
    --
  • Product Length (mm)
    11.05(mm)
  • Height Seated (Max)
    0.032 (0.80mm)
  • Product Height (mm)
    13.46(mm)
  • Ratings
    --
0 Similar Products Remaining