5269

Molex 5269

Part No:

5269

Manufacturer:

Molex

Datasheet:

-

Package:

HC-49/US

AINNX NO:

36751420-5269

Description:

5-15 CONNECTOR HI-IMPACT

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    HC-49/US
  • Number of Terminals
    3
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Voltage Rating Max
    125V
  • Body Orientation
    Straight
  • Mounting Styles
    Cable
  • Voltage, Rating
    125 V
  • NEMA Rating
    5-15
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 85°C
  • Series
    SXTHM2
  • Size / Dimension
    0.524 L x 0.197 W (13.30mm x 5.00mm)
  • Type
    MHz Crystal
  • Color
    Black, White
  • Gender
    RCP
  • Current Rating

    Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

    15 A
  • Frequency
    25 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±50ppm
  • Number of Contacts
    2POWER/1GROUND(POS)
  • ESR (Equivalent Series Resistance)
    30 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    17pF
  • Number of Ports

    A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

    1(Port)
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±30ppm
  • Current Rating (Max)
    15/Contact(A)
  • Product
    Receptacles
  • Mounting Angle
    Straight
  • Height Seated (Max)
    0.177 (4.50mm)
0 Similar Products Remaining