0936010554

Molex 0936010554

Part No:

0936010554

Manufacturer:

Molex

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

39510160-0936010554

Category:

Miscellaneous

Description:

S-M 10/12 F INS CRP 12P 10A 250V

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Housing Material
    Polycarbonate (PC)
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Voltage, Rating
    250V
  • Base Product Number
    093601
  • Contact Materials
    -
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -10°C ~ 60°C
  • Series
    SXT114
  • Size / Dimension
    0.063 L x 0.047 W (1.60mm x 1.20mm)
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Connector Type
    Insert without Contacts
  • Type
    MHz Crystal
  • Number of Positions
    12+Ground
  • Color
    Gray
  • Gender
    Female
  • Contact Type
    -
  • Current Rating (Amps)
    10A
  • Frequency
    38.4 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±15ppm
  • Contact Finish
    -
  • Termination Style
    Crimp
  • ESR (Equivalent Series Resistance)
    100 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    12pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±10ppm
  • Size
    -
  • Height Seated (Max)
    0.018 (0.45mm)
  • Material Flammability Rating
    UL94 V-0
0 Similar Products Remaining