Micross MTLM137AHVQP

Mounting Type

Through Hole

Package / Case

Axial

Lead Free Status / RoHS Status

--

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

10V

Lifetime @ Temp.

--

Supplier Package

TO-257

Junction to Case

4.2 °C/W

Input Voltage Range

-4.25 to -51.25 V

Maximum Input Voltage

-51.25 V

Mounting

Through Hole

Usage Level

Military grade

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 125°C

Series

Military, MIL-PRF-39003/3, CSR23

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Size / Dimension

0.289 Dia x 0.686 L (7.34mm x 17.42mm)

Tolerance

±20%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

--

Type

Hermetically Sealed

Capacitance

220µF

Pin Count

a count of all of the component leads (or pins)

3

Function

Standard

Number of Outputs

1

Output Voltage

-1.2 to -47 V

Output Type

Adjustable

ESR (Equivalent Series Resistance)

--

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

C (0.01%)

Polarity

Negative

Lead Spacing

the distance between two baselines of lines of type. The word 'leading' originates from the strips of lead hand-typesetters used to use to space out lines of text evenly. The word leading has stuck, but essentially it's a typographer's term for line spacing.

--

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1.5 A

Manufacturer Size Code

C

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

1.3 V

Screening Level

Military

Line Regulation

Line regulation is the ability of a power supply to maintain a constant output voltage despite changes to the input voltage, with the output current drawn from the power supply remaining constant.

±25 mV

Load Regulation

Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

±15 mV

Features

Military

Typical Power Dissipation

20 W

Height Seated (Max)

--