Micro Plastics 23TA00100

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Number of Pins

8

Material

Nylon

Package Quantity

1000

Number of Elements

2

RoHS

Compliant

Mounting Method

Push-In

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85 °C

Min Operating Temperature

-40 °C

Color

Natural

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

330 mW

Output Type

TTL

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.5 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.7 V

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

8 mA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

450 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

130 µA

Common Mode Rejection Ratio

80 dB

Input Offset Voltage (Vos)

1 mV

Input Bias Current

1 pA

Hysteresis

3 mV

Overall Length

.380 in

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

Lead Free

Contains Lead