Microdot 142-0002-0002

Package / Case

0201 (0603 Metric)

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Through Hole

Supplier Device Package

201

Body Material

Brass

Package

Tape & Reel (TR)

Mfr

Kamaya Inc.

Product Status

Active

Contact Materials

Brass

RoHS

Non-Compliant

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

RMC

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Size / Dimension

0.024 L x 0.012 W (0.60mm x 0.30mm)

Tolerance

±1%

Number of Terminations

2

Termination

Solder

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±200ppm/°C

Connector Type

Plug

Resistance

261 kOhms

Composition

Thick Film

Gender

Male

Power (Watts)

0.05W, 1/20W

Orientation

Right Angle

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

ELV

Non-Compliant

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

50 Ω

Body Plating

Gold

Features

-

Height Seated (Max)

0.010 (0.26mm)

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

Lead Free

Contains Lead

Ratings

-