TC9400CPD

Microchip Technology TC9400CPD

Part No:

TC9400CPD

Datasheet:

TC9400-02

Package:

14-DIP (0.300, 7.62mm)

ROHS:

AINNX NO:

4972831-TC9400CPD

Description:

IC, F/V-V/F CONVERTER, 9400, DIP14 - More Details

Products specifications
  • Factory Lead Time
    5 Weeks
  • Mount
    Through Hole
  • Mounting Type
    Through Hole
  • Package / Case
    14-DIP (0.300, 7.62mm)
  • Number of Pins
    14
  • Usage Level
    Commercial grade
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tube
  • Published
    2002
  • JESD-609 Code
    e3
  • Pbfree Code
    yes
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    14
  • ECCN Code
    EAR99
  • Type
    Volt to Frequency and Frequency to Volt
  • Terminal Finish
    Matte Tin (Sn)
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    70°C
  • Min Operating Temperature
    0°C
  • Terminal Position
    DUAL
  • Number of Functions
    1
  • Supply Voltage
    5V
  • Terminal Pitch

    The center distance from one pole to the next.

    2.54mm
  • Frequency
    100kHz
  • Base Part Number
    TC9400
  • Pin Count

    a count of all of the component leads (or pins)

    14
  • Output Voltage
    18V
  • Max Output Current

    The maximum current that can be supplied to the load.

    10mA
  • Temperature Grade

    Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

    COMMERCIAL
  • Number of Channels
    1
  • Interface
    Analog
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    15V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    8V
  • Nominal Supply Current

    Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

    1.5mA
  • Power Dissipation

    the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

    730mW
  • Max Output Voltage

    The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

    6.5V
  • Resolution
    1.625 B
  • Max Dual Supply Voltage

    A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

    7.5V
  • Power Consumption

    Power consumption is the amount of input energy (measured in watts) required for an electrical appliance to function. This is opposed to power output which is a measure of the level of performance, of a heat pump for example.

    27mW
  • Linearity
    ±0.05%
  • Min Dual Supply Voltage
    4V
  • Dual Supply Voltage
    5V
  • Negative Supply Voltage-Nom
    -5V
  • Positive Input Voltage-Max
    5V
  • Negative Input Voltage-Max
    -2V
  • Full Scale

    In electronics and signal processing, full scale represents the maximum amplitude a system can represent.

    ±40ppm/°C
  • Height
    4.95mm
  • Length
    19.69mm
  • Width
    7.11mm
  • REACH SVHC
    No SVHC
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Microchip Technology TC9400CPD.