Microchip Technology MIC3385YHL-TR

Factory Lead Time

8 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

14-VFDFN Exposed Pad, 14-MLF®

Number of Pins

14

Supplier Device Package

14-MLF® (3x3.5)

Voltage-Output 1

1V

Usage Level

Automotive grade

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2007

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

SMD/SMT

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125°C

Min Operating Temperature

-40°C

Voltage - Supply

2.7V~5.5V

Base Part Number

MIC3385

Number of Outputs

2

Output Voltage

6V

Output Type

Adjustable

Max Output Current

The maximum current that can be supplied to the load.

600mA

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.7V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

16μA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

600mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

6V

Voltage - Output 2

1V

Topology

Step-Down (Buck) Synchronous (1), Linear (LDO) (1)

Min Input Voltage

2.7V

Frequency - Switching

8MHz

Max Input Voltage

5.5V

Current - Output 1

1A

Dropout Voltage

Dropout voltage is the input-to-output differential voltage at which the circuit ceases to regulate against further reductions in input voltage; this point occurs when the input voltage approaches the output voltage.

110mV

Min Output Voltage

1V

Current - Output 2

120mA

w/Sequencer

No

Voltage/Current - Output 1

Adj to 1V 1A

Voltage/Current - Output 2

1V 120mA

w/LED Driver

No

w/Supervisor

No

Height

880μm

Length

3.5mm

Width

3mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free