Microchip Technology MIC2009YM6-TR

Factory Lead Time

4 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

SOT-23-6

Number of Pins

6

Supplier Device Package

SOT-23-6

Usage Level

Industrial grade

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2011

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Resistance

70mOhm

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-40°C

Base Part Number

MIC2009

Number of Outputs

1

Output Voltage

6V

Output Type

P-Channel

Max Output Current

The maximum current that can be supplied to the load.

2A

Number of Channels

1

Interface

On/Off

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.5V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

330μA

Output Configuration

High Side

Voltage - Supply (Vcc/Vdd)

Not Required

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

1.5 ms

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Min Input Voltage

2.5V

Max Input Voltage

5.5V

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

5.5V

Ratio - Input:Output

1:1

Voltage - Load

2.5V~5.5V

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting (Adjustable), Over Temperature

Rds On (Typ)

70mOhm

Height

1.3mm

Length

2.9mm

Width

1.75mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free