Microchip Technology MCP1402T-E/OT

Factory Lead Time

11 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

SC-74A, SOT-753

Number of Pins

5

Driver Configuration

Low-Side

Logic voltage-VIL, VIH

0.8V 2.4V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2005

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

5

ECCN Code

EAR99

Terminal Finish

Matte Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

390mW

Voltage - Supply

4.5V~18V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

MCP1402

Pin Count

a count of all of the component leads (or pins)

5

Number of Outputs

1

Output Voltage

18V

Max Output Current

The maximum current that can be supplied to the load.

500mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

200μA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

390mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

500mA

Max Supply Current

1.1mA

Input Type

Non-Inverting

Output Characteristics

TOTEM-POLE

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

25ns

Fall Time (Typ)

20 ns

Output Polarity

TRUE

Rise / Fall Time (Typ)

19ns 15ns

Interface IC Type

PUSH-PULL BASED MOSFET DRIVER

Channel Type

Single

Input Bias Current

10μA

Output Peak Current Limit-Nom

0.5A

Gate Type

IGBT, N-Channel, P-Channel MOSFET

Current - Peak Output (Source, Sink)

500mA 500mA

High Side Driver

NO

Height

1.2954mm

Length

3.0988mm

Width

1.8034mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free