Microchip Technology HV20220PJ-G

Factory Lead Time

1 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

28-LCC (J-Lead)

Number of Pins

28

Weight

1.182714g

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

5 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~70°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tray

Published

2013

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

28

Resistance

38Ohm

Terminal Finish

Matte Tin (Sn) - annealed

Applications

Ultrasound

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

ALSO REQUIRES VPP (40V TO VNN +200V) AND VNN (-40V TO -160V) SUPPLY

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1.2W

Terminal Position

QUAD

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

J BEND

Peak Reflow Temperature (Cel)

245

Number of Functions

1

Supply Voltage

5V

Terminal Pitch

The center distance from one pole to the next.

1.27mm

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

HV20220

Number of Outputs

8

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

12V

Number of Channels

8

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

13.2V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4.5V

Analog IC - Other Type

SINGLE-ENDED MULTIPLEXER

Operating Supply Current

7mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

1.2W

Max Supply Current

10μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

5 μs

Voltage - Supply, Single/Dual (±)

40V~200V ±40V~160V

Supply Type

Dual

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

200V

-3db Bandwidth

50MHz

On-State Resistance (Max)

38Ohm

Min Dual Supply Voltage

40V

Dual Supply Voltage

100V

Multiplexer/Demultiplexer Circuit

1:1

Off-state Isolation-Nom

33 dB

On-state Resistance Match-Nom

1.35Ohm

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPST

Switch-on Time-Max

5000ns

Switch-off Time-Max

5000ns

Normal Position

NO

Height

3.68mm

Length

11.51mm

Width

11.51mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant