Microchip Technology ATA6836C-TIQY-19

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

28-SOIC (0.295, 7.50mm Width)

Number of Pins

28

Supplier Device Package

28-SO

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

1997

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150°C

Min Operating Temperature

-40°C

Applications

Bulbs, DC Motors, Resistors

Voltage - Supply

4.75V~5.25V

Base Part Number

ATA6836C

Number of Outputs

6

Max Output Current

The maximum current that can be supplied to the load.

650mA

Interface

SPI

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

40V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

7.5V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

800μA

Output Configuration

Half Bridge (6)

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

650mA

Max Supply Current

150μA

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

100ns

Fall Time (Typ)

100 ns

Voltage - Load

5.5V~40V

Fault Protection

Protection against electric shock under. single fault conditions.

Open Load Detect, Over Temperature, Short Circuit, UVLO

Number of Drivers

6

Rds On (Typ)

1Ohm LS, 1Ohm HS

Current - Peak Output

650mA

Load Type

Inductive, Capacitive, Resistive

Features

Status Flag

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant