Maxim Integrated MAX5064BATC+

Factory Lead Time

6 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

12-WQFN Exposed Pad

Number of Pins

12

Driver Configuration

Half-Bridge

Logic voltage-VIL, VIH

0.8V 2V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2007

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

12

ECCN Code

EAR99

Terminal Finish

Matte Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1.95W

Voltage - Supply

8V~12.6V

Terminal Position

QUAD

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

12V

Terminal Pitch

The center distance from one pole to the next.

0.8mm

Base Part Number

MAX5064

Pin Count

a count of all of the component leads (or pins)

12

Max Output Current

The maximum current that can be supplied to the load.

2A

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

260μA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

2A

Max Supply Current

3mA

Input Type

Inverting, Non-Inverting

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

7ns

Fall Time (Typ)

7 ns

Rise / Fall Time (Typ)

65ns 65ns

Channel Type

Independent

Number of Drivers

2

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

0.063 µs

Output Peak Current Limit-Nom

2A

Gate Type

N-Channel MOSFET

Current - Peak Output (Source, Sink)

2A 2A

High Side Driver

YES

Turn Off Time

0.063 µs

High Side Voltage - Max (Bootstrap)

125V

Height

750μm

Length

4.1mm

Width

4.1mm

REACH SVHC

Unknown

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free