Maxim Integrated MAX4899AEETE+

Factory Lead Time

16 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

16-WFQFN Exposed Pad

Number of Pins

16

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

3 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2008

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

ECCN Code

EAR99

Resistance

12Ohm

Applications

USB

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1.667W

Terminal Position

QUAD

Peak Reflow Temperature (Cel)

260

Number of Functions

2

Supply Voltage

3.3V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Base Part Number

MAX4899

Pin Count

a count of all of the component leads (or pins)

16

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

3/3.3V

Number of Channels

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

3.6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.7V

Operating Supply Current

3μA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

200 ps

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

2.8 μs

Logic Function

Multiplexer

Supply Type

Single

Supply Current-Max (Isup)

0.6mA

On-State Resistance (Max)

12Ohm

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

120mA

Multiplexer/Demultiplexer Circuit

4:1

Off-state Isolation-Nom

45 dB

On-state Resistance Match-Nom

0.5Ohm

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SP4T

Switching

MAKE-BEFORE-BREAK

Voltage - Supply, Single (V+)

2.7V~3.6V

Features

Fault Protection, USB 2.0

Length

3mm

Height Seated (Max)

0.8mm

REACH SVHC

Unknown

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant