Maxim Integrated MAX15023ETG+

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

24-WFQFN Exposed Pad

Number of Pins

24

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2008

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

24

ECCN Code

EAR99

Terminal Finish

TIN

Terminal Position

QUAD

Peak Reflow Temperature (Cel)

260

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Frequency

1MHz

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

MAX15023

Function

Step-Down

Number of Outputs

2

Output Voltage

5.2V

Output Type

Transistor Driver

Input Voltage-Nom

12V

Analog IC - Other Type

DUAL SWITCHING CONTROLLER

Output Configuration

Positive

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

15A

Voltage - Supply (Vcc/Vdd)

4.5V~28V

Control Features

Current Limit, Enable, Frequency Control, Power Good

Topology

Buck

Min Input Voltage

5.5V

Control Mode

VOLTAGE-MODE

Frequency - Switching

200kHz~1MHz

Max Input Voltage

28V

Control Technique

PULSE WIDTH MODULATION

Synchronous Rectifier

Synchronous rectification is a technique for improving the efficiency of rectification by replacing diodes with actively controlled switches, usually power MOSFETs or power bipolar junction transistors (BJT).

Yes

Dropout Voltage

Dropout voltage is the input-to-output differential voltage at which the circuit ceases to regulate against further reductions in input voltage; this point occurs when the input voltage approaches the output voltage.

70mV

Switcher Configuration

PHASE-SHIFT

Max Duty Cycle

87.5 %

Clock Sync

Clock synchronization is a topic in computer science and engineering that aims to coordinate otherwise independent clocks. Even when initially set accurately, real clocks will differ after some amount of time due to clock drift, caused by clocks counting time at slightly different rates.

No

Length

4mm

Height Seated (Max)

0.8mm

Width

4mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant