Maxim Integrated MAX1203BEAP+

Factory Lead Time

6 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

20-SSOP (0.209, 5.30mm Width)

Number of Pins

20

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2012

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

20

Termination

SMD/SMT

ECCN Code

EAR99

Terminal Finish

Matte Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

7.5mW

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

5V

Terminal Pitch

The center distance from one pole to the next.

0.65mm

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

MAX1203

Pin Count

a count of all of the component leads (or pins)

20

Polarity

Bipolar, Unipolar

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

3/55GND/-5V

Configuration

MUX-S/H-ADC

Number of Channels

8

Interface

SPI, Serial

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.25V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4.75V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

1.5mA

Number of Bits

12

Input Type

Differential, Single Ended

Architecture

SAR

Number of Inputs

4, 8

Converter Type

ADC, SUCCESSIVE APPROXIMATION

Supply Type

Dual

Reference Type

a code object that is not stored directly where it is created, but that acts as a kind of pointer to a value stored elsewhere.

External

Data Interface

A Data Interface in EDQ is a template of a set of attributes representing a given entity, used to create processes that read from, or write to, interfaces rather than directly from or to sources or targets of data.

SPI

Resolution

1.5 B

Sampling Rate

often described in the context of signal processing as the number of samples per time.

133 ksps

Voltage - Supply, Analog

±5V 5V

Voltage - Supply, Digital

2.7V~5.25V

Number of Analog In Channels

8

Sampling Rate (Per Second)

133k

Output Bit Code

BINARY, 2'S COMPLEMENT BINARY

Linearity Error-Max (EL)

0.0244%

Sample and Hold / Track and Hold

TRACK

Number of A/D Converters

1

Conversion Rate

the number of conversions divided by the total number of visitors.

133 ksps

Ratio - S/H:ADC

1:1

Negative Supply Voltage-Nom

-5V

Length

7.2mm

Width

5.29mm

REACH SVHC

Unknown

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free