Maxim Integrated 5962-8766001PA

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

8-CDIP (0.300, 7.62mm)

Driver Configuration

Half-Bridge

Logic voltage-VIL, VIH

0.8V 2V

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

30 ns

Usage Level

Military grade

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

1996

JESD-609 Code

e0

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Finish

Tin/Lead (Sn/Pb)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

500mW

Voltage - Supply

4.5V~17V

Terminal Position

DUAL

Peak Reflow Temperature (Cel)

240

Number of Functions

2

Reach Compliance Code

not_compliant

Time@Peak Reflow Temperature-Max (s)

20

Pin Count

a count of all of the component leads (or pins)

8

JESD-30 Code

R-GDIP-T8

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Output Voltage

100mV

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

4.5/15V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

7mA

Max Supply Current

7mA

Input Type

Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

50 ns

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

30ns

Fall Time (Typ)

30 ns

Rise / Fall Time (Typ)

20ns 20ns

Interface IC Type

BUFFER OR INVERTER BASED MOSFET DRIVER

Screening Level

MIL-STD-883 Class B

Channel Type

Independent

Number of Drivers

2

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

0.04 µs

Gate Type

N-Channel MOSFET

High Side Driver

YES

Turn Off Time

0.06 µs

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant