MAX98358EWL+
2-SMD, No Lead
40158347-MAX98358EWL+
Audio Amplifiers PCM Input Class D
having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.
the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
The center distance from one pole to the next.
the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.
An indicator of formal certification of qualifications.
an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?
Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.
the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.
A phase of operation during the operation and maintenance stages of the life cycle of a facility.
the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.
That power available at a specified output of a device under specified conditions of operation.
a group of products which fulfill a similar need for a market segment or market as a whole.
a particular group of related products.