Lumissil IS32CS8974-ZNLA3-TR

Mounting Type

Surface Mount

Package / Case

24-TSSOP (0.173, 4.40mm Width)

Supplier Device Package

24-TSSOP

Qualification

AEC-Q200

Voltage, Rating

75 V

Number of I/Os

20

Package

Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;

Mfr

Lumissil Microsystems

Data Converters

-

Product Status

Active

Factory Pack QuantityFactory Pack Quantity

2500

Manufacturer

ISSI

Brand

Lumissil

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 125°C (TA)

Series

Automotive, AEC-Q100

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

100 ppm/K

Resistance

107 kOhm

Subcategory

Memory & Data Storage

Power Rating

0.1 W

Resistor Type

General Purpose

Oscillator Type

Wien Bridge Oscillator; RC Phase Shift Oscillator; Hartley Oscillator; Voltage Controlled Oscillator; Colpitts Oscillator; Clapp Oscillators; Crystal Oscillators; Armstrong Oscillator.

Internal

Speed

25MHz

RAM Size

2K x 13

Voltage - Supply (Vcc/Vdd)

2.5V ~ 5.5V

Core Processor

8051

Peripherals

LVD, LVR, POR, PWM, WDT

Program Memory Type

Program memory typically refers to flash memory when it is used to hold the program (instructions). Program memory may also refer to a hard drive or solid state drive (SSD). Contrast with data memory.

FLASH

Core Size

8-Bit

Program Memory Size

32KB (32K x 8)

Connectivity

I²C, LINbus, SPI, UART/USART

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

DRAM

EEPROM Size

-

Resistance Tolerance

Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

1

Product Category

a particular group of related products.

DRAM

Product Length

1.55 mm

Product Width

0.85 mm