0980 ESL 312-121

Lumberg Automation 0980 ESL 312-121

Part No:

0980 ESL 312-121

Manufacturer:

Lumberg Automation

Datasheet:

-

Package:

-

AINNX NO:

35789948-0980 ESL 312-121

Category:

Boxes

Description:

Lumberg Automation 0980 ESL 312-121 Sensor & actuator box (active) M12 splitter + steel thread 1 pc(s)

Products specifications
  • Package / Case
    -
  • Mounting Type
    -
  • Product Status
    Active
  • Mfr
    TST
  • Package
    Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;
  • Manufacturer part #
    0980 ESL 312-121
  • Min. temperature
    -20°C
  • Content
    1pc(s)
  • Max. temperature
    +70°C
  • Case material
    Diecast zinc
  • Total no. of pins
    8
  • Factory colour
    Silver
  • Voltage, Rating
    24 V
  • Coding
    L Coded
  • Series
    -
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -
  • Size / Dimension
    -
  • Type
    MHz Crystal
  • Gender
    Female / Male
  • Current Rating

    Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

    16 A
  • Frequency
    26 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    -
  • Output Type
    M12 Connector - 5 Pole
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    6.8pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±10ppm
  • IP Rating

    IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

    IP65, IP67, IP69K
  • Height Seated (Max)
    -
  • Ratings
    -
0 Similar Products Remaining