BZT03C33

Littelfuse BZT03C33

Part No:

BZT03C33

Manufacturer:

Littelfuse

Datasheet:

-

Package:

0805 (2012 Metric)

AINNX NO:

39008969-BZT03C33

Description:

Zener Diode Single 33V 6% 15Ohm 3250mW 2-Pin DO-41

Products specifications
  • Package / Case
    0805 (2012 Metric)
  • Supplier Device Package
    0805
  • Package
    Tape & Reel (TR)
  • Base Product Number
    RS73F2ART
  • Mfr
    KOA Speer Electronics, Inc.
  • Product Status
    Active
  • Operating Temperature Classification
    Military
  • Package Type
    DO-41
  • Typical Voltage Temperature Coefficient
    0.085%/K
  • Rev Curr
    0.001(mA)
  • Operating Temp Range
    -65C to 175C
  • Knee Impedance
    15
  • Rad Hardened
    No
  • Test Current (It)
    25(mA)
  • Mounting
    Through Hole
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -55°C ~ 155°C
  • Series
    RS73-RT
  • Size / Dimension
    0.079 L x 0.049 W (2.00mm x 1.25mm)
  • Tolerance
    ±0.5%
  • Number of Terminations
    2
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    ±25ppm/°C
  • Type
    Voltage Regulator
  • Resistance
    392 Ohms
  • Composition
    Thick Film
  • Power (Watts)
    0.25W, 1/4W
  • Pin Count

    a count of all of the component leads (or pins)

    2
  • Failure Rate

    the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

    -
  • Configuration
    Single
  • Power Dissipation

    the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

    3.25(W)
  • Zener Voltage
    33
  • Voltage Tolerance

    The voltage tolerance level for the electrical auxiliaries is defined by the standard. The maximum and minimum nominal voltages are defined by the tolerance level.

    6%
  • Features
    Automotive AEC-Q200
  • Height Seated (Max)
    0.023 (0.60mm)
  • Ratings
    AEC-Q200
0 Similar Products Remaining