Lattice Semiconductor M4-64/32-15JC

Package / Case

1206 (3216 Metric)

Supplier Device Package

1206

Package

Tape & Reel (TR)

Mfr

TE Connectivity Passive Product

Product Status

Active

Number of Macrocells

64

Number of I/Os

32

RoHS

Non-Compliant

Memory Types

EEPROM

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

3503

Size / Dimension

0.120 L x 0.061 W (3.05mm x 1.55mm)

Tolerance

±1%

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±50ppm/°C

Resistance

69.8 Ohms

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

70 °C

Min Operating Temperature

0 °C

Composition

Thin Film

Power (Watts)

2W

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.25 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4.75 V

Number of Gates

The number of gates per IC varies depending on the number of inputs per gate. Two?input gates are common, but if only a single input is required, such as in the 744 NOT(or inverter) gates, a 14 pin IC can accommodate 6 (or Hex) gates.

2500

Max Frequency

182 MHz

Number of Programmable I/O

32

Features

-

Height Seated (Max)

0.023 (0.58mm)

Ratings

-