Lapp 11266000

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Silver

Number of Pins

40

Enclosure

Yes

Manufacturer Part Number

RSWT6025GGV10

Approvals

CE, UL

Manufacturer

Carlo Gavazzi

With protective conductor

Yes

Connectable conductor cross section fine-strand with cable end sleeve

0.14 - 2.5

Type of electric connection

Crimp connection

Ambient temperature

-40 - 125

Rated current In

10

Connectable conductor cross section fine-strand without cable end sleeve

0.14 - 2.5

Material connector insert

Thermoplastic

Diameter plug-in contact

1.6

Material of contact surface

Silver

Material contact

Brass

Contact insert without contacts

No

Connectable conductor cross section multi-wired

0.14 - 2.5

Pollution degree

3

With wire protection

Yes

Overvoltage category

II

Inflammability class of insulation material according to with UL94

V0

Rated surge voltage

2.5

Connectable conductor cross section solid-core

0.14 - 2.5

Overload Protection

Overload protection is a protection against a running overcurrent that would cause overheating of the protected equipment. Hence, an overload is also type of overcurrent. Overload protection typically operates on an inverse time curve where the tripping time becomes less as the current increases.

Yes

Control Voltage

100 VAC, 240 VAC

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP20