Lapp 0031066

Mounting Type

Panel Mount

Mounting Feature

a process by which the operating system makes files and directories on a storage device (such as hard drive, CD-ROM, or network share) available for users to access via the computer's file system.

Bulkhead - Rear Side Nut

Dielectric Material

a substance that is a poor conductor of electricity, but an efficient supporter of electrostatic field s.

Polytetrafluoroethylene (PTFE)

Body Material

Beryllium Copper

Center Contact Plating

Gold

Center Contact Material

Beryllium Copper

Frequency-Max

500 MHz

Product Status

Active

Mfr

Winchester Interconnect

Base Product Number

7704

Package

Bulk

Stranding element

No

Flame retardant

According to IEC/EN 60332-1-2

Permitted cable outer temperature after assembling without vibration

-40 - 80

Material core insulation

Polyvinyl chloride (PVC)

Conductor surface

Bare

Colour outer sheath

Grey

Permitted cable outer temperature during assembling/handling

-5 - 70

Outer diameter approx.

5.7

Screen over stranding element

None

Halogen free according to IEC 60754-2

No

Core identification

Colour

Nominal cross section conductor

0.25

Screen over stranding

Braiding

Low smoke (according to EN 61034-2)

No

Min. permitted bending radius, stationary application/permanent installation

34.2

Low smoke according to IEC 61034-2

No

Material outer sheath

Polyvinyl chloride (PVC)

Conductor category

Class 5 = flexible

Series

Tri-Loc®

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-

Connector Type

Receptacle, Female Socket

Fastening Type

There are 5 Main Types of Fastening Type: Screws, Nails, Bolts, Anchors, Rivets.

Snap-On

Ingress Protection

Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

-

Housing Color

Silver

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

75Ohm

Connector Style

Triaxial

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

1

Mating Cycles

to the number of a times a physical connector can “mate” or connect to it's counterpart.

-

Contact Termination

Solder Cup

Includes

4 pcs - 1 Connector, 1 Cap, 1 Lockwasher, 1 Nut

Insertion Loss

the loss of signal power resulting from the insertion of a device in a transmission line or optical fiber and is usually expressed in decibels (dB).

-

Body Finish

Body Finish Paint is a very high-quality and fast drying 1-component acrylic lacquer, specially developed to spray new or repaired sheet metal as well as parts of machines giving them an OEM finish.

Nickel

Cable Group

A cable group describes the group of cables that are compatible with a particular contact.

-

Shield Termination

Solder

Features

-