KYOCERA WAP3015W08-U100D3B0A

Manufacturer Part Number

HA52525002651

Approvals

CE

Mounting Styles

Shafted

Shaft Type

Single Ended

Manufacturer

Dynapar

RoHS

Yes

Typical Antenna Gain

3/6.7 dBi

Mounting

Adhesive Mount

Antenna Mounting

Adhesive

Antenna Connector Type

U.FL

Protocol - WiFi - 802.11

WiFi

Mechanical Style

PCB Trace

Electrical Type

Embedded

Center Frequency

2.4 GHz, 5 GHz

Protocol - Sub GHz

-

Cable Types

100 mm Coax

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0 to 70 Degrees C

Termination

Side Mount Connector

Connector Type

U.FL

Type

Embedded Wi-Fi Dual Band Antenna

Applications

Access Points, Routers, Gateways, Enabled TVs Monitors

Subcategory

Antennas

Power Rating

-

Style

T-Bar Flex

Termination Style

Connector

Output Voltage

5 VDC

Output Type

Differential

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

50 Ohms

Cable Length

A nautical unit of measure equal to one tenth of a nautical mile or approximately 1 fathoms.

0.1 m

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

2.4GHz Antenna - 2.4GHz, 5GHz, Bluetooth, WiFi, WLAN, Zigbee

Gain

6.7dBi

Antenna Type

There are several different types of antennas in three broad categories: omni-directional, directional, and semi-directional.

PCB

VSWR

-

Number of Bands

2 Band

Input Impedance

The input impedance of an electrical network is the measure of the opposition to current (impedance), both static (resistance) and dynamic (reactance), into the load network that is external to the electrical source.

50ohm

Product

PCB Antennas

Input Power

-

Input Voltage

5~26 VDC

Bearings

Yes

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP54

Mating Connector

Not Included

Width

15.5 mm

Height

0.8 mm

Length

30 mm