TCG121SVLPAANN-AN*16

KYOCERA TCG121SVLPAANN-AN*16

Part No:

TCG121SVLPAANN-AN*16

Manufacturer:

KYOCERA

Datasheet:

-

Package:

4-SOJ, 5.5mm pitch

AINNX NO:

39772330-TCG121SVLPAANN-AN*16

Description:

TFT Module Normally White-Transmissive 12.1in 800x600Pixels 30-Pin

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SOJ, 5.5mm pitch
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Typical Contrast Ratio
    1000:1
  • Resolution Standard
    SVGA
  • Factory Pack QuantityFactory Pack Quantity
    10
  • Manufacturer
    KYOCERA
  • Brand
    KYOCERA Display
  • RoHS
    Details
  • Usage Level
    Commercial grade
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -20°C ~ 70°C
  • Series
    SXT834
  • Size / Dimension
    0.315 L x 0.150 W (8.00mm x 3.80mm)
  • Type
    MHz Crystal
  • Subcategory
    Displays
  • Frequency
    29.4912 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±25ppm
  • Pin Count

    a count of all of the component leads (or pins)

    30
  • ESR (Equivalent Series Resistance)
    60 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    18pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±25ppm
  • Product Type

    a group of products which fulfill a similar need for a market segment or market as a whole.

    TFT Displays
  • Screening Level
    Commercial
  • Display Mode
    Normally White-Transmissive
  • Backlight
    LED
  • Active Area
    246 x 184.5 mm
  • Product Category

    a particular group of related products.

    TFT Displays & Accessories
  • Pixel Format
    800x600 Pixels
  • Height Seated (Max)
    0.098 (2.50mm)
  • Ratings
    -
0 Similar Products Remaining