KYOCERA DP03A5425TTR500

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Supplier Package

LGA

Category

Chip Multilayer Diplexer

Mounting

Surface Mount

Usage Level

Industrial grade

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-20°C ~ 70°C

Series

SXT114

Size / Dimension

0.063 L x 0.047 W (1.60mm x 1.20mm)

Type

MHz Crystal

Frequency

26 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±25ppm

Pin Count

a count of all of the component leads (or pins)

6

ESR (Equivalent Series Resistance)

150 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

9pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±25ppm

Screening Level

Industrial

Frequency Bands (Low / High)

-

High Band Attenuation (min / max dB)

-

Low Band Attenuation (min / max dB)

-

Return Loss (Low Band / High Band)

-

Height Seated (Max)

0.018 (0.45mm)