KYOCERA 2041470258

Mounting Type

Through Hole

Resistive Material

The resistive material is a combination of a Ceramic material and a Metal, and therefore these resistors are also referred to as Cermet. Just as with carbon film, the resistance value is adjusted by cutting a spiral pattern in the film. This can be done with an abrasive or a laser.

Cermet

Qualification

AEC-Q200

Tolerance ±

20%

Connections

Print

Operation type

side

Content

1pc(s)

CS

5mm,10mm

Outside Ø

14.8mm

Voltage, Rating

300 V

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+ 90 C

Unit Weight

0.412264 oz

Minimum Operating Temperature

- 40 C

Factory Pack QuantityFactory Pack Quantity

400

Mounting Styles

Panel Mount

Manufacturer

KYOCERA AVX

Brand

KYOCERA AVX

Number of Detents

Without Detent

RoHS

N

Package

Bulk

Mfr

KYOCERA AVX

Product Status

Active

Series

415

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Size / Dimension

Round - 0.583 Dia (14.80mm)

Tolerance

20 %

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

100 ppm/K

Type

2041470258

Resistance

3 Ohm

Power (Watts)

1W

Subcategory

Potentiometers, Trimmers & Rheostats

Power Rating

0.0625 W

Orientation

Horizontal

Resistor Type

General Purpose

Termination Style

Snap-In

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

No Switch

Adjustment Type

Top Adjustment

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

Potentiometers

Number of Turns

1 Turn

Taper

Linear

Resistance Tolerance

Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

1

Number of Gangs

1 Gang

Element Type

describes a class of elements, including their properties and applicable actions.

Cermet

Product

Potentiometers

Product Category

a particular group of related products.

Potentiometers

Product Length

1 mm

Product Width

0.5 mm

Length

6.8 mm

Diameter

14.8 mm