KYOCERA 1000423

Mounting Type

Direct

Weight

1.6g

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+85°C

Minimum Operating Temperature

-40°C

Antenna Mounting

UFL Connector

Antenna Connector Type

U.FL

Protocol - WiFi - 802.11

802.11 a/b/g/n/c, WiFi, WLAN

Mechanical Style

Stamped

Electrical Type

Embedded

Mounting Styles

PCB Mount

Center Frequency

2442.5 MHz, 5487 MHz

Protocol - Sub GHz

-

Cable Types

-

Connector Type

UFL

Type

Passive Antenna

Applications

Embedded Design, Cellular, Headsets, Tablets, Gateway, Access Point, Handheld, Telematics, Tracking, Healthcare, M2M, Smart Grid, OBD-II

Subcategory

Antennas

Power Rating

2 W

Style

Metal

Termination Style

SMD/SMT

Polarization

Linear

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

50 Ohms

Cable Length

A nautical unit of measure equal to one tenth of a nautical mile or approximately 1 fathoms.

100mm

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

2.4GHz Antenna - 2.4GHz, 5GHz, Bluetooth, WiFi, WLAN, Zigbee

Gain

0.6, 4.5dBi

Frequency Range

A continuous range or spectrum of frequencies that extends from one limiting frequency to another.

2.4 GHz, 5 GHz

Antenna Type

There are several different types of antennas in three broad categories: omni-directional, directional, and semi-directional.

Stamped

VSWR

3

Number of Bands

4 Band

Input Impedance

The input impedance of an electrical network is the measure of the opposition to current (impedance), both static (resistance) and dynamic (reactance), into the load network that is external to the electrical source.

50ohm

Product

PCB Antennas

Input Power

-

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

-

Width

15 mm

Height

6.4 mm

Length

40 mm