KYOCERA 007023029000111

Mounting Type

Through Hole

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Material - Insulation

--

Mounting Hole Diameter

0.070 ~ 0.077 (1.78mm ~ 1.96mm)

Length Below Flange

--

Contact Materials

Brass

Length Above Flange

--

Body Orientation

Right Angle

Termination Method

Solder

Base/Housing Material

Diallyl Phthalate

Mounting

Through Hole

Series

AMPMODU

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Reel

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40 to 125 °C

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Termination

Press-Fit

Type

Rack and Panel

Gender

Plug

Pitch

5.0800 mm

Insulation Color

--

Contact Finish

Gold

Insulation

Non-Insulated

Terminal Type

Terminal type or emulation specifies how your computer and the host computer to which you are connected exchange information.

Single Post

Flange Diameter

Flange diameter is measured between centers of opposite holes in the hub flange. It is usually between 38 and 67 millimeters. Note that it is NOT the outside diameter of the hub's flange. Left and right flange diameters are often, but not always, the same.

--

Terminal Style

Pin Retention

Pin Size - Above Flange

0.045 (1.14mm) Square

Pin Size - Below Flange

0.045 (1.14mm) Square

Contact Finish Thickness

30.0µin (0.76µm)

Length - Overall

0.620 (15.75mm)

Board Thickness

0.100 (2.54mm)