KEMET TOKIN MPLCH0740L4R7

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Mount

Surface Mount

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

RoHS

Compliant

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C ~ 70°C

Series

SXT224

Size / Dimension

0.098 L x 0.079 W (2.50mm x 2.00mm)

Tolerance

20 %

Termination

SMD/SMT

Type

MHz Crystal

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

120 °C

Min Operating Temperature

-20 °C

Composition

Wirewound

Shielding

Unshielded

Depth

6.9 mm

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

5.8 A

Frequency

20 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±50ppm

Military Standard

Not

ESR (Equivalent Series Resistance)

80 Ohms

Inductance

4.7 µH

Test Frequency

a statistical procedure for assessing data that contain counts or the numbers of occurrences of various categories or classes.

100 kHz

DC Resistance (DCR)

33 mΩ

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

9pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Max DC Current

5.8 A

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±30ppm

Inductance Tolerance

20 %

DC Current

5.8 A

RMS Current (Irms)

5.8 A

Saturation Current

6.5 A

Height Seated (Max)

0.026 (0.65mm)

Width

6.7 mm

Height

4 mm

Length

7.8 mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

Lead Free

Contains Lead