JAE MM60-52-B1-B1

Part No:

MM60-52-B1-B1

Manufacturer:

JAE

Datasheet:

Package:

4-SMD, No Lead

AINNX NO:

36756897-MM60-52-B1-B1

Category:

Memory

Description:

JAE 52 Way Right Angle Mini PCIe, PCI Memory Card Connector With Solder Termination

Products specifications

Mounting Type
Surface Mount
Package / Case
4-SMD, No Lead
Contact Plating
Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.
Gold over Nickel
Package
Bulk
Mfr
Suntsu Electronics, Inc.
Product Status
Active
Dimensions
29.7 x 3.9 x 10mm
Body Orientation
Right Angle
Maximum Operating Temperature
the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
+80°C
Minimum Operating Temperature
-40°C
Termination Method
Solder
Contact Materials
Copper Alloy
Operating Temperature
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
0°C ~ 70°C
Series
SXT214
Size / Dimension
0.079 L x 0.063 W (2.00mm x 1.60mm)
Type
MHz Crystal
Number of Rows
2
Gender
Female
Pitch
0.8mm
Depth
10.0mm
Frequency
16 MHz
Frequency Stability
the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.
±50ppm
Number of Contacts
52
ESR (Equivalent Series Resistance)
200 Ohms
Card Type
Mini PCIe, PCI
Load Capacitance
the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.
8pF
Operating Mode
A phase of operation during the operation and maintenance stages of the life cycle of a facility.
Fundamental
Frequency Tolerance
the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.
±20ppm
Height Seated (Max)
0.020 (0.50mm)
Width
3.9mm
Length
29.7mm

0 Similar Products Remaining