IXGN120N60A3D1

IXYS IXGN120N60A3D1

Part No:

IXGN120N60A3D1

Manufacturer:

IXYS

Package:

SOT-227-4, miniBLOC

ROHS:

AINNX NO:

6051287-IXGN120N60A3D1

Description:

IGBT MOD 600V 200A 595W SOT227B

Products specifications
  • Factory Lead Time
    26 Weeks
  • Mount
    Chassis Mount
  • Mounting Type
    Chassis Mount
  • Package / Case
    SOT-227-4, miniBLOC
  • Weight
    38.000013g
  • Transistor Element Material
    SILICON
  • Collector-Emitter Breakdown Voltage
    600V
  • Number of Elements
    1
  • Turn Off Delay Time

    It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

    410 ns
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -55°C~150°C TJ
  • Series
    GenX3™
  • Published
    2009
  • Pbfree Code
    yes
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    4
  • Terminal Finish
    Nickel (Ni)
  • Additional Feature

    Any Feature, including a modified Existing Feature, that is not an Existing Feature.

    LOW CONDUCTION LOSS, UL RECOGNIZED
  • Max Power Dissipation

    The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

    595W
  • Terminal Position
    UPPER
  • Terminal Form

    Occurring at or forming the end of a series, succession, or the like; closing; concluding.

    UNSPECIFIED
  • Base Part Number
    IXG*120N60
  • Pin Count

    a count of all of the component leads (or pins)

    4
  • JESD-30 Code
    R-PUFM-X4
  • Configuration
    Single
  • Case Connection
    ISOLATED
  • Turn On Delay Time

    Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

    39 ns
  • Power - Max
    595W
  • Transistor Application
    POWER CONTROL
  • Polarity/Channel Type
    N-CHANNEL
  • Input
    Standard
  • Collector Emitter Voltage (VCEO)
    1.35V
  • Max Collector Current
    200A
  • Current - Collector Cutoff (Max)
    650μA
  • Input Capacitance

    The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

    14.8nF
  • Turn On Time

    The time that it takes a gate circuit to allow a current to reach its full value.

    123 ns
  • Vce(on) (Max) @ Vge, Ic
    1.35V @ 15V, 100A
  • Turn Off Time-Nom (toff)
    830 ns
  • IGBT Type
    PT
  • NTC Thermistor

    resistors with a negative temperature coefficient, which means that the resistance decreases with increasing temperature.

    No
  • Gate-Emitter Voltage-Max
    20V
  • Input Capacitance (Cies) @ Vce
    14.8nF @ 25V
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for IXYS IXGN120N60A3D1.