ITT B51

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Shell Material

STEEL

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Shell Sizes

1/E

Insulator Material

PLASTIC

Manufacturer Part Number

B51

Manufacturer

The Phoenix Company Of Chicago Inc

Part Life Cycle Code

Contact Manufacturer

Ihs Manufacturer

THE PHOENIX COMPANY OF CHICAGO INC

Risk Rank

5.69

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C ~ 85°C

Series

SXT224

Size / Dimension

0.098 L x 0.079 W (2.50mm x 2.00mm)

Connector Type

D SUBMINIATURE CONNECTOR

Type

MHz Crystal

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

MAX CONTACTS (SERIES)=5

MIL Conformance

NO

DIN Conformance

NO

IEC Conformance

NO

Filter Feature

NO

Mixed Contacts

YES

Option

GENERAL PURPOSE

Reach Compliance Code

unknown

Frequency

25 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±50ppm

Contact Gender

FEMALE; MALE

Empty Shell

NO

ESR (Equivalent Series Resistance)

80 Ohms

Body/Shell Style

PLUG; RECEPTACLE

Termination Type

SOLDER

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

10pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±30ppm

Height Seated (Max)

0.026 (0.65mm)