1929000422

ITT 1929000422

Part No:

1929000422

Manufacturer:

ITT

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

39014063-1929000422

Description:

Conn Rectangular F 12 POS 5.08mm Solder ST Thru-Hole

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Contact Plating

    Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

    Gold
  • Housing Material
    Nylon
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Voltage Rating Max
    250VAC
  • Body Orientation
    Straight
  • Number of Contact Rows
    3
  • Product Depth (mm)
    16.2(mm)
  • Operating Temp Range
    -40C to 105C
  • Mounting Styles
    Through Hole
  • Pitch (mm)
    5.08(mm)
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -20°C ~ 70°C
  • Series
    SXT224
  • Size / Dimension
    0.098 L x 0.079 W (2.50mm x 2.00mm)
  • Type
    MHz Crystal
  • Gender
    RCP
  • Total Number of Contacts
    12(POS)
  • Frequency
    50 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±30ppm
  • Termination Style
    Solder
  • ESR (Equivalent Series Resistance)
    50 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    17pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±15ppm
  • Current Rating (Max)
    13(A)
  • Product Length (mm)
    35.2(mm)
  • Height Seated (Max)
    0.026 (0.65mm)
  • Product Height (mm)
    13.5(mm)
  • Ratings
    -
0 Similar Products Remaining