
050-451-0000-220
Radial
40600824-050-451-0000-220
Conn SSMC RCP 0Hz to 12.4GHz 50Ohm Solder ST Thru-Hole
a substance that is a poor conductor of electricity, but an efficient supporter of electrostatic field s.
The DC Voltage ratings are the AC voltage values times 1.41 (usually rounded).
In general the AC voltage assumes a 50-60 Hz sinusoidal waveform and is the RMS (root mean squared) value.
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
Any Feature, including a modified Existing Feature, that is not an Existing Feature.
Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.
the distance between two baselines of lines of type. The word 'leading' originates from the strips of lead hand-typesetters used to use to space out lines of text evenly. The word leading has stuck, but essentially it's a typographer's term for line spacing.
The measurement of insulation resistance is carried out by means of a megohmmeter – high resistance range ohmmeter. A general rule-of-thumb is 10 Megohm or more.
In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.
A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.
the loss of signal power resulting from the insertion of a device in a transmission line or optical fiber and is usually expressed in decibels (dB).