ISSI IS31FL3729-TQLS4-TR

Mounting Type

Surface Mount

Package / Case

133-VFBGA

Supplier Device Package

133-FBGA (8x8)

Package

Tape & Reel (TR)

Base Product Number

S72XS256

Mfr

Infineon Technologies

Product Status

Active

Memory Types

Non-Volatile, Volatile

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+ 125 C

Minimum Operating Temperature

- 40 C

Mounting Styles

SMD/SMT

Input Voltage-Max

5.5 V

Input Voltage-Min

2.7 V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 85°C (TA)

Series

XS-R

Type

Linear

Applications

General Purpose

Subcategory

Driver ICs

Technology

FLASH, DRAM

Voltage - Supply

1.7V ~ 1.95V

Frequency

1MHz

Number of Outputs

16

Operating Frequency

Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.

1 MHz

Output Voltage

Adjustable

Number of Channels

16 Channel

Memory Size

The memory capacity is the amount of data a device can store at any given time in its memory.

256Mbit (FLASH), 256Mbit (DDR DRAM)

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

35 mA

Clock Frequency

108 MHz

Supply Current-Max

3 mA

Voltage - Output

-

Topology

Constant Current

Memory Format

FLASH, RAM

Memory Interface

An external memory interface is a bus protocol for communication from an integrated circuit, such as a microprocessor, to an external memory device located on a circuit board.

Parallel

Write Cycle Time - Word, Page

-

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

LED Lighting Drivers

Current - Output / Channel

-

Internal Switch(s)

No

Dimming

PWM

Voltage - Supply (Max)

5.5V

Voltage - Supply (Min)

2.7V

Features

PWM Dimming, Open LED Protection

Input Voltage

2.7 V to 5.5 V

Memory Organization

-