Isocom Components 2004 LTD H11L1

Factory Lead Time

2 Weeks

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

6-DIP (0.300, 7.62mm)

Number of Pins

6

Manufacturer Package Identifier

H11L1

Number of Elements

1

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

4 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-25°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

Not Applicable

Voltage - Supply

3V~15V

Reach Compliance Code

unknown

Voltage - Isolation

5000Vrms

Output Voltage

16V

Output Type

Open Collector

Configuration

SINGLE

Number of Channels

1

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

250mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

50mA

Max Supply Current

5mA

Input Type

DC

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

4 μs

Optoelectronic Device Type

LOGIC IC OUTPUT OPTOCOUPLER

Forward Current

Current which flows upon application of forward voltage.

10mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

15V

Data Rate

Data Rate is defined as the amount of data transmitted during a specified time period over a network. It is the speed at which data is transferred from one device to another or between a peripheral device and the computer. It is generally measured in Mega bits per second(Mbps) or Mega bytes per second(MBps).

1MHz

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

500ns

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.15V

Fall Time (Typ)

500 ns

Peak Reverse Current

The maximum voltage that a diode can withstand in the reverse direction without breaking down or avalanching.If this voltage is exceeded the diode may be destroyed. Diodes must have a peak inverse voltage rating that is higher than the maximum voltage that will be applied to them in a given application.

10μA

Rise / Fall Time (Typ)

100ns 50ns

Max Input Current

50mA

Input Current

10mA

On-State Current-Max

0.05A

Propagation Delay tpLH / tpHL (Max)

6μs, 3μs

Inputs - Side 1/Side 2

1/0

Hysteresis Ratio-Nom

0.5

Height

4.8mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free