Intersil (Renesas Electronics America) DG406DYZ

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Package / Case

SOIC

Number of Pins

28

Weight

2.214806g

Power Dissipation (Max)

1.2mW

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

300 ns

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Published

2000

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

28

ECCN Code

EAR99

Resistance

50Ohm

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-40°C

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

15V

Time@Peak Reflow Temperature-Max (s)

30

Pin Count

a count of all of the component leads (or pins)

28

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

28V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

INDUSTRIAL

Number of Channels

16

Interface

Logic

Number of Circuits

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

40V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

5V

Operating Supply Current

80μA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

80μA

Max Supply Current

100μA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

300 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

600 ns

Logic Function

Multiplexer

Supply Type

Dual, Single

Neg Supply Voltage-Nom (Vsup)

-15V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

20V

Min Dual Supply Voltage

5V

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

30mA

Dual Supply Voltage

9V

Off-state Isolation-Nom

69 dB

On-state Resistance Match-Nom

5Ohm

Switching

BREAK-BEFORE-MAKE

Switch-on Time-Max

200ns

Max Junction Temperature (Tj)

150°C

Height

2.35mm

Length

18.1mm

Width

7.6mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free