International Rectifier IPS6011PBF

Mount

Through Hole

Number of Pins

5

Case/Package

TO-220

RoHS

Compliant

Termination

Through Hole

Type

Switch

Resistance

11 mΩ

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150 °C

Min Operating Temperature

-40 °C

Power Rating

25 W

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

25 W

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

18 A

Number of Outputs

1

Output Voltage

28 V

Max Output Current

The maximum current that can be supplied to the load.

60 A

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

28 V

Voltage

5.5 V

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.5 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4 V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2.2 mA

Current

18 A

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

25 W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

18 A

Clamping Voltage

39 V

Output Current per Channel

18 A

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

25 µs

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

5.5 V

Continuous Drain Current (ID)

18 A

Dual Supply Voltage

28 V

Input Current

40 µA

Load Current

The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

2.4 A

Drain to Source Resistance

11 mΩ

Nominal Vgs

2.5 V

Height

9.02 mm

Length

10.668 mm

Width

4.826 mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

REACH SVHC

No SVHC

Lead Free

Lead Free