International Rectifier IPS5451S

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

TO-263-5, D²Pak (4 Leads + Tab), TO-263BB

Number of Pins

220

Supplier Device Package

D2Pak (SMD-220 5-Lead)

Factory Pack QuantityFactory Pack Quantity

1

Manufacturer

C&K Switches

Brand

C&K

RoHS

Compliant

Package

Bulk

Mfr

International Rectifier

Product Status

Obsolete

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 150°C (TJ)

Series

-

Resistance

19 mΩ

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150 °C

Min Operating Temperature

-40 °C

Subcategory

MIL-Spec / MIL-Type

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1.58 W

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

4 A

Number of Outputs

1

Output Type

N-Channel

Max Output Current

The maximum current that can be supplied to the load.

3.5 A

Number of Channels

1

Interface

On/Off

Current - Output (Max)

3.5A

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

3.5 mA

Output Configuration

High Side

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

1.58 W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1 A

Voltage - Supply (Vcc/Vdd)

Not Required

Input Type

Non-Inverting

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Clamping Voltage

50 V

Output Current per Channel

3.5 A

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

D-Sub MIL Spec Connectors

Ratio - Input:Output

1:1

Voltage - Load

5.5V ~ 18V

Fault Protection

Protection against electric shock under. single fault conditions.

Over Temperature

Rds On (Typ)

19mOhm

Drain to Source Resistance

25 mΩ

Features

Auto Restart

Product Category

a particular group of related products.

D-Sub MIL Spec Connectors

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

Lead Free

Contains Lead