Infineon Technologies PVT312LSPBF

Factory Lead Time

16 Weeks

Mount

PCB, Surface Mount

Mounting Type

Surface Mount

Package / Case

6-SMD (0.300, 7.62mm)

Number of Pins

6

Number of Elements

1

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

PVT, HEXFET®

Published

2009

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

4 (72 Hours)

Termination

Gull Wing

Resistance

15Ohm

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-40°C

Capacitance

50pF

Voltage - Rated DC

250V

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

300mA

Termination Style

Gull Wing

Voltage - Rated AC

250V

Approval Agency

UL

Output Voltage

250V

Output Type

AC, DC

Circuit

SPST-NO (1 Form A)

Insulation Resistance

The measurement of insulation resistance is carried out by means of a megohmmeter – high resistance range ohmmeter. A general rule-of-thumb is 10 Megohm or more.

10GOhm

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

250V

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

170mA

Number of Poles

1

Throw Configuration

SPST

Input Type

DC

Optoelectronic Device Type

TRANSISTOR OUTPUT SSR

Forward Current

Current which flows upon application of forward voltage.

25mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

250V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

3ms

Relay Type

Relay

Fall Time (Typ)

500 μs

Voltage - Load

0V~250V

RMS Current (Irms)

170mA

On-State Resistance (Max)

15Ohm

Max Input Current

25mA

Input Current

25mA

Isolation Voltage

Isolation voltage refers to a test of the ability of an insulator to minimize the flow of electric current with a high applied voltage.

4kV

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

85°C

Control Current

0.002A

On-State Resistance

15Ohm

Height

4.43mm

Length

9.39mm

Width

6.35mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead