Infineon Technologies PVI1050NPBF

Factory Lead Time

16 Weeks

Mount

PCB, Through Hole

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Number of Pins

8

Supplier Device Package

8-DIP

Number of Elements

2

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

220 μs

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

10V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

PVI

Published

2003

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

Through Hole

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-40°C

Capacitance

2pF

Voltage - Rated DC

1.4V

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

50mA

Approval Agency

UL

Voltage - Isolation

2500Vrms

Output Voltage

10V

Output Type

Photovoltaic

Insulation Resistance

The measurement of insulation resistance is carried out by means of a megohmmeter – high resistance range ohmmeter. A general rule-of-thumb is 10 Megohm or more.

10GOhm

Number of Channels

2

Number of Circuits

2

Number of Poles

2

Throw Configuration

DP

Input Type

DC

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

160 μs

Forward Current

Current which flows upon application of forward voltage.

50mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

5V

Max Surge Current

Surge current is a peak non repetitive current. Maximum (peak or surge) forward current = IFSM or if(surge), the maximum peak amount of current the diode is able to conduct in forward bias mode.

1A

Output Current per Channel

5μA

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.4V

Fall Time (Typ)

220 μs

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

1.4V

Reverse Breakdown Voltage

6V

Max Input Current

50mA

Load Current

The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

10μA

Turn On / Turn Off Time (Typ)

300μs, 220μs (Max)

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead