Infineon Technologies IRSM836-035MA

Factory Lead Time

18 Weeks

Mount

PCB, Surface Mount

Mounting Type

Surface Mount

Package / Case

36-PowerVQFN

Number of Pins

36

SwitchingFrequency

20kHz

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

1.5 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tray

Published

2013

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

36

Applications

Appliance

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

36W

Voltage - Supply

13.5V~16.5V

Terminal Position

QUAD

Supply Voltage

15V

Base Part Number

IRSM836-035

Function

Driver - Fully Integrated, Control and Power Stage

Number of Outputs

1

Max Output Current

The maximum current that can be supplied to the load.

3A

Interface

Parallel

Analog IC - Other Type

AC MOTOR CONTROLLER

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

10mA

Output Configuration

Half Bridge (3)

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

36W

Max Supply Current

10mA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

1.5 μs

Logic Function

AND

Collector Emitter Voltage (VCEO)

500V

Max Collector Current

3A

Voltage - Load

400V Max

Number of Drivers

6

Isolation Voltage

Isolation voltage refers to a test of the ability of an insulator to minimize the flow of electric current with a high applied voltage.

1.5kV

Motor Type - AC, DC

AC, Synchronous

Height

950μm

Length

12mm

Width

12mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free