IRAMS06UP60B

Infineon Technologies IRAMS06UP60B

Part No:

IRAMS06UP60B

Datasheet:

IRAMS06UP60B

Package:

23-PowerSIP Module, 19 Leads, Formed Leads

ROHS:

AINNX NO:

5051786-IRAMS06UP60B

Description:

PLUG N DRIVE INTEGRATED PWR MOD

Products specifications
  • Factory Lead Time
    13 Weeks
  • Mount
    Through Hole
  • Mounting Type
    Through Hole
  • Package / Case
    23-PowerSIP Module, 19 Leads, Formed Leads
  • Number of Pins
    23
  • Collector-Emitter Breakdown Voltage
    600V
  • Turn Off Delay Time

    It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

    615 ns
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Box
  • Series
    iMOTION™
  • Published
    2006
  • JESD-609 Code
    e0
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Obsolete
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    25
  • Type
    IGBT
  • Terminal Finish
    TIN LEAD
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    125°C
  • Min Operating Temperature
    -40°C
  • Max Power Dissipation

    The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

    7.5W
  • Terminal Position
    ZIG-ZAG
  • Number of Functions
    1
  • Supply Voltage
    15V
  • Terminal Pitch

    The center distance from one pole to the next.

    1.98mm
  • Frequency
    20kHz
  • JESD-30 Code
    R-PZFM-T25
  • Number of Outputs
    3
  • Voltage - Isolation
    2000Vrms
  • Output Voltage
    450V
  • Operating Supply Voltage

    The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

    15V
  • Configuration
    3 Phase
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    20V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    12V
  • Nominal Supply Current

    Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

    1.6mA
  • Power Dissipation

    the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

    7.5W
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    6A
  • Turn On Delay Time

    Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

    470 ns
  • Collector Emitter Voltage (VCEO)
    600V
  • Height
    22.3mm
  • Length
    62mm
  • Width
    5mm
  • REACH SVHC
    No SVHC
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    RoHS Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Infineon Technologies IRAMS06UP60B.