Infineon Technologies IR5001STRPBF

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

130 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2005

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Type

N+1 ORing Controller

Terminal Finish

Matte Tin (Sn)

Applications

-48V Dist Power Systems

Voltage - Supply

36V~75V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

12.5V

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

IR5001SPBF

Output Voltage

12.5V

Max Output Current

The maximum current that can be supplied to the load.

3A

Operating Supply Current

500μA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

750μA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

5mA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

27 μs

FET Type

N-Channel

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

700μs

Fall Time (Typ)

26 ns

Threshold Voltage

9.6V

Ratio - Input:Output

N:1

Internal Switch(s)

No

Number of Drivers

1

Input Bias Current

900μA

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

0.045 μs

Output Peak Current Limit-Nom

3A

High Side Driver

NO

Delay Time - ON

27μs

Height

1.57mm

Length

4.9784mm

Width

3.9878mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free