Infineon Technologies IR2156STRPBF

Factory Lead Time

12 Weeks

Mount

Surface Mount, Through Hole

Mounting Type

Surface Mount

Package / Case

14-SOIC (0.154, 3.90mm Width)

Number of Pins

14

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

55 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-25°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2002

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

14

Termination

SMD/SMT

ECCN Code

EAR99

Type

Ballast Controller

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1W

Voltage - Supply

10.5V~16.5V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Supply Voltage

14V

Frequency

36kHz~44kHz

Base Part Number

IR2156SPBF

Output Voltage

25V

Max Output Current

The maximum current that can be supplied to the load.

500mA

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

15.6V

Operating Supply Current

1mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

10mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

1W

Max Supply Current

10mA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

110 ns

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

25V

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

600V

Input Offset Voltage (Vos)

600V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

150ns

Fall Time (Typ)

100 ns

Min Output Voltage

10V

Release Time

In telecommunication, release time is the time interval for a circuit to respond when an enabling signal is discontinued

100 ns

Number of Drivers

2

Dimming

No

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead, Lead Free