Infineon Technologies ICE3BR4765JFKLA1

Factory Lead Time

20 Weeks

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Number of Pins

8

Weight

930.006106mg

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

CoolMOS™, CoolSET™F3R

Published

2007

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Finish

Tin (Sn)

Power (Watts)

27W

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

27W

Terminal Position

DUAL

Number of Functions

1

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Base Part Number

ICE3BR4765

Pin Count

a count of all of the component leads (or pins)

8

Number of Outputs

1

Output Voltage

650V

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

25V

Input Voltage-Nom

18V

Analog IC - Other Type

SWITCHING REGULATOR

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

500mA

Voltage - Supply (Vcc/Vdd)

10.5V~27V

Topology

Flyback

Control Mode

CURRENT-MODE

Frequency - Switching

65kHz

Input Voltage (Max)

24.5V

Control Technique

PULSE WIDTH MODULATION

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

30ns

Drain to Source Voltage (Vdss)

650V

Fall Time (Typ)

30 ns

Switcher Configuration

SINGLE

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

650V

Internal Switch(s)

Yes

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting, Over Load, Over Temperature, Over Voltage

Max Duty Cycle

75 %

Output Isolation

Isolated

Voltage - Start Up

18V

Width

7.62mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free