Infineon Technologies BTS70082EPAXUMA1

Factory Lead Time

18 Weeks

Mounting Type

Surface Mount

Package / Case

14-TSSOP (0.154, 3.90mm Width) Exposed Pad

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

25 μs

Usage Level

Automotive grade

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

PROFET®

Published

2016

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

2A (4 Weeks)

Number of Terminations

14

ECCN Code

EAR99

Terminal Finish

Tin (Sn)

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Number of Functions

1

Supply Voltage

13.5V

Terminal Pitch

The center distance from one pole to the next.

0.65mm

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

JESD-30 Code

R-PDSO-G14

Number of Outputs

2

Output Type

N-Channel

Supply Voltage-Max (Vsup)

18V

Supply Voltage-Min (Vsup)

6V

Interface

On/Off

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

3mA

Output Configuration

High Side

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

7.5A

Voltage - Supply (Vcc/Vdd)

Not Required

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

35 μs

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

28V

Ratio - Input:Output

1:1

Voltage - Load

3.1V~28V

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO

Screening Level

AEC-Q100

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

110 μs

Output Peak Current Limit-Nom

7.5A

Rds On (Typ)

9m Ω

Max Junction Temperature (Tj)

150°C

Turn Off Time

100 μs

Built-in Protections

TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE

Height

1.15mm

Length

4.9mm

Width

3.9mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant