Infineon Technologies BTS3028SDLATMA1

Factory Lead Time

18 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

TO-252-3, DPak (2 Leads + Tab), SC-63

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

HITFET®

Published

2009

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

2

ECCN Code

EAR99

Terminal Finish

Tin (Sn)

Terminal Position

SINGLE

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Number of Functions

1

Supply Voltage

13.5V

Terminal Pitch

The center distance from one pole to the next.

2.28mm

Base Part Number

BTS3028

Pin Count

a count of all of the component leads (or pins)

4

JESD-30 Code

R-PSSO-G2

Number of Outputs

1

Output Type

N-Channel

Max Output Current

The maximum current that can be supplied to the load.

5A

Supply Voltage-Min (Vsup)

8V

Interface

On/Off

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

10μA

Output Configuration

Low Side

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

5A

Voltage - Supply (Vcc/Vdd)

Not Required

Input Type

Non-Inverting

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Halogen Free

Halogen Free

Drain to Source Voltage (Vdss)

60V

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

10V

Ratio - Input:Output

1:1

Voltage - Load

60V Max

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

60V

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting (Fixed), Over Temperature, Over Voltage

Output Peak Current Limit-Nom

5.8A

Rds On (Typ)

28m Ω

Turn Off Time

200 μs

Built-in Protections

TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL

Length

6.5mm

Height Seated (Max)

2.5mm

Width

6.22mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead